On board computer
 

Nevermind all is well and has been fixed. Thanks for your help!!

This isn't a good description, but there is a lever type thing that holds it on there. When you slide it down it should just pop the plug right out. Then when you put it back on you can slide it back up and it will lock it into place.

If the OBC still works but just the display isn't bright enough why didn't you just replace the bulbs?

Is it possible to change the bulds in the OBC since it's an LCD?

Thanks....he says he thinks he gets what your saying. I'll get back if it doesn't work, if it does I'll be back to thank you!!!!

I was told no....sometimes it would go all the way out, sometimes it wouldn't but I found a new clock on Ebay for it for like 10.00 so I bought it. BMW told me at least a couple hundred bucks to fix it.

how much did you buy it for?? Mine dont light up at all, i dont know if i need a new box, or if its the fuses, which i dont even know which fuse it is.

I just happened to see it on Ebay and I got it for less than 20.00 I think. And thanks for everyone's help it has been replaced and is working great!

it is working or only the clock part is working?

Only the clock part is working.

Was your ti a 95? If so i thought 95's didn't have an OBC?

I have a 95 with the OBC.

1996. The OBC used to work but something happened and it wouldn't light up, you could read it if you looked really hard in the daylight but at night forget it. So it always worked but didn't light up properly at times.