318ti.org forum - Need Help identifying outer door seal part #. +?'s

Hey guys,

As some of you know i recently finished my swap, and ive been driving the car on and off (when im home from school) VERY happily. Since it has been finished i have been focusing on fixing the body up and getting her up to par, as when i first recieved Eleanor =) she was a bit deprived of love from the former owner. Most dents have been pulled and such a new nose panel and a FREE* spray to get the grey off the bumpers/rockers( it was because i was rearended but lightly just paint damage). Now i need help with a few small things Primarily Re-adjusting the rear bumper to sit correctly again, and some window seals i have outlined what seal im talking about Realoem.com is not vert clear in identifying this one, has anyone replaced it? curious how annoying it will be. also the door lock on my drivers side is missing the metal cover in which the key slides into?:confused:? can i replace that? or do i need a whole new lock? As usually thread would be useless without pics right? so without further to do here you go. *Note Ds2's are now currently gunmetal with no more rash =). **also corners are now semi tinted they looked better a little darker.

Very Respectfully,
Paul.