OBC retrofit (complete)
 

Was seeing if anyone would be interested in buying a complete retrofit kit of the OBC? I can get one which includes; obc clock, signal switch, and harness.

Price would be around $100-$150.

Hit me up asap.

SOLD

10/20/14
Update; found another complete kit. Lmk if you're interested.

bump for my big brother marv! I just seen this done on sunday and this thing is F*CKING TITS!!! SOMEONE SHOULD GET ON THIS!

Tried to send you a message but your PM box is full. I'll take it pending final cost.

Sorry. I cleared it now. You can send me a message still you have any questions.

Okay. Let me see if I can still get it. Someone had it available while I was picking up parts yesterday so wanted to pass on the hard to find parts. Beats spending $250+ for it.
Install is easy if you follow the instructions (they can be hard to see and interpret what it's explaining). It's tedious work to put it but simple enough. I did mine within a couple of hours.
No programming needed as well since it's used parts from another 318ti.

SOLD

Marvin, where are the instructions for the retrofit?

Thanks! :cool:

Let me find the thread for Ya.

Try this thread out. Info is in there on the steps. I didn't go with the port wiring but instead behind the cluster since it was easier access.

http://www.318ti.org/forum/showthread.php?t=13175

Thanks Marvin! I'll be reading it this evening. Thanks again! Rich :cool:

It seems confusing at first to read, well it was for me, but it's really simple. Everything that you need to connect to is under the dash on the driver's side. There is a black box where all the wires lead to. If you can move it down to access it you will see that they are color coordinated wires. Just snap each lead into its paired up wires and you're all good. The only challenging one was the one that goes to the diagnostic port near the fuse box but I connect that one behind the cluster.
Oh and the temperature sensor wire is a pain to get thru the firewall. I gave you extra wires to use as well.
Happy modding

Bump.
Got a hold of another obc kit. Hurry before it disappears.

Well if anyone is interested I'll keep my eye out for another kit. Or anything else needed.

Thanks Marvin! I have an OBD kit already so I'm set there. Just the passenger side M trim for me.


1998 & 1997 318ti Sport Schwartz II
1995 318ti Active Alpineweib III

Seems like an interesting mod. This performs the same duties as the OBC on the TI, but takes up less space? So you can still put your choice of radio in?

I have tons on the 'to do' list so probably not interested in that right now, but I do need the one piece of M trim on drivers fender. Sorry if off topic, blame Rich!

:rolleyes: I hear that quite often... :cool: