318ti.org forum (http://www.318ti.org/forum/index.php)
-   Parting out & Parts (US) (http://www.318ti.org/forum/forumdisplay.php?f=103)
-   -   Misc parts Downing Atlanta Supercharger Kit (Recently Rebuilt) for M44 Engines (http://www.318ti.org/forum/showthread.php?t=42147)

sanelko 12-29-2015 10:59 PM

Downing Atlanta Supercharger Kit (Recently Rebuilt) for M44 Engines
 
Hello. Just testing the waters on my DASC. The kit would include EVERYTHING necessary for the install on a M44 engine (The kit for the M42 engines consists of different brackets, hardware, etc.).

The rebuild was done by Jon Bond and includes the following:
m ext drive rebuil...
Seal 20V47 SKF 20V47 Seal China 848420: $26.32
6204ODGBB SKF 6204ODGB bearing 848230 Argentina: $20.02
6303ODGBB SKF 6303ODGB Bearing Argentina 848230: $32.28
JB SCO-8 Jon Bond Performance Supercharger oil with Tribodyn : $19.99
Magnuson Extended drive rebuild kit. Will not work with 2.5" drive: $98.61
E key Eaton pulley keyway: $2.49
E pulley nut Eaton pulley nut- for securing keyway pulleys: $4.99
E oil fill plug eaton oil fill plug $4.99
E rotor pack kit
Seal 2233.3 AL JBP 22PTFEM33.3 AL Seal: $39.78
Seal 2234.9 AL JBP 22PTFEM34.9 AL Seal: $39.78
6203ODGBB SKF 6203ODGB Bearing Argentina 8482.10.50.68 : $47.70
E retainer Bearing retainer for Eaton rotor packs. Requires TIG weld in place. 741521 USA: $40.00
Eaton rotor pack only rebuild kit: $167.26
Needle 17.24 E needle bearing 17x24 closed: $88.88
E M62/MP62 G3 ... Eaton M62/ MP62 G3 rotors: $349.99
m bypass 764 Vacuum bypass valve VA764A: $109.99
LABOR LABOR - SUPERCHARGER REPAIR: $340.00
SHIP UPS UPS Shipping Charge : $54.42
LABOR LABOR - Repair damage to rear of case: $42.50
LABOR - PC LABOR - PAINT/POWDERCOATING/COATINGblasting, pre-bake, clean, tape and coat single stage powder coat: $285.00
Total for parts + labor: $1,549.12

Only 5k miles added since the rebuild in September, and still under the 20k miles 6 month warranty. Not everything that will be included is in the pictures, but you would receive everything necessary to install the supercharger on a m44 engine (all the accessories such as hoses, pulleys, and belt were replaced with new parts). The current pulley on the blower is a 3.6", but I also have a 3.2" pulley I will be including as well. You will also be receiving a Vortech RRFP in case you want to use stock tuning and injectors. I got Nick G's (technique tuning) stage 2 tune with the 30lb fuel injectors (which I can include) so I had no use for it.

Send me a message with any questions you may have. Pictures can be found on Bimmerforums Panjo.

Price: $2500

BomjM3 01-06-2016 07:58 PM

Hey would you have a picture of the CARB sticker for this kit?

sanelko 01-06-2016 08:05 PM

I don't even have the sticker myself, don't live in Cali so no need anyways.

Quickly found on Google though:
http://s52.photobucket.com/user/cama..._0266.jpg.html

yobayn 01-06-2016 08:07 PM

Ok I will check it out and get back too you


Sent from my iPhone using Tapatalk


All times are GMT +1. The time now is 05:26 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org