FS: E36 Brakes, rotors, springs, etc.
 

Accepting reasonable offers; I'll entertain unreasonable offers as well.

Hawk HT-10's for E36 vented front rotors (non-M); new in box

https://lh3.googleusercontent.com/iL...7woTN3Hc=w2400

https://lh3.googleusercontent.com/I0...-8sw-bz8=w2400

Centric E36 vented front rotors (non-M)

https://lh3.googleusercontent.com/zB...1MEpwV70=w2400

TCKline front coilovers springs - 400lb/in, 7in, 60mm, used

https://lh3.googleusercontent.com/C_...06awFFvQ=w2400

TCKline rear (beehive) springs - 600lb/in, standard length

https://lh3.googleusercontent.com/6R...fqlUDCaM=w2400

Vorschlag poly (black) m42/m44 motor mounts for E36, never installed

https://lh3.googleusercontent.com/zm...BUeAre_s=w2400

Turner RSM's, aluminum with bushings, used

https://lh3.googleusercontent.com/Qh...-ZKVpPcU=w2400


Thanks in advance!

Interested in the Rotors and poly motor mounts. Able to send pics of the rotors? I'm assuming they're a direct swap, or are they wider than stock? mjschwartz24 at gmail

Updated with pics. Rotors are stock from 98+ 318Ti's (as well as E36 325/8's) with the vented front rotors. On my '95, I had swapped out the original solid front rotors & calipers for the vented rotors and larger calipers from a 325. If you are contemplating using your car for track/autocross, I'd suggest grabbing the pads also; makes a world of difference.

Total streetcar - not planning on autox. I currently have slotted rotors in the front that probably need to be turned, but I have no plans on changing the calipers.

Still interested in poly motor mounts (mostly because I think the fluid in my rubber ones is leaking)

Make offers on any of this stuff - just sitting around, unused, unloved. Someone's gotta want some nice front brake pads and rotors at least...

How much for the motor mounts?

PM sent.

What would you take for the rotors & pads. Don't really think I can use them because the car is mainly an AutoX car that I have to drive to & from events and they are not really good for street use as I understand. But if the price is too good to pass up... maybe.

PM sent.