M44 Performance & Race Camshaft Sets
 

Bought these around 2 months ago and tried to install them once but timing went off and had to swap over into a m42 and no longer needing these.

Never actually ran on these before. I ordered them from VAC but they were out of stock and had to order from EU; ended up being cat cams....!

Description of these cams link: http://store.vacmotorsports.com/vac-...ets-p1929.aspx

http://www.catcams.com/products/cams...MSETUP_id=1349

284/283 cam shafts for m44 engine! Selling for 950$ OBO, ship within USA only, let me know, Thanks!|

*LIKE NEW***

Just curious. What is the hp gain output with these?

Nice camshaft set. Looking at the camshaft specs from your link these should rock the mid-range through redline. I would buy these if I wasn't boosting.

Good luck with the sale, Smith

Not sure, bought these and never dyno'd it. Thought these would be nice to put into the drift project of my 98 ti but never got it running.

**maximum high end power, it says for the cams

http://www.ebay.com/itm/201181160423...84.m1555.l2649


My ebay link! If anyone in here buy the item off my ebay, i will take 30$ off!
Just message me in ebay, thanks guys! Need the money...

If I still had the m44 motor I would definitely have gotten these. It'd push up to hp to a 2.8 level, perhaps.

Thanks guys, yeah these would be nice. Living in the states!
For someone who wants quick performance camsets let me know!
Took me close to a month to order them through VAC from Belgium. : /

http://www.ebay.com/itm/201185081056...84.m1555.l2649

920$ on ebay now! If you are from this site, message me on ebay and i can let it go for 900$! +++free shippping : P

Final sale! 860$!! hmu

http://www.ebay.com/itm/201192023930...84.m1555.l2649

Anyone have an idea about what it would cost to have these installed?

800$!!!!!! Need money asap! Lmk! Or message me on ebay! Thanks!

bumpppp

http://www.ebay.com/itm/201207534206...84.m1555.l2649


750$$!!! LMK

http://www.ebay.com/itm/201207534206...84.m1555.l2649


700$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
700$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

Ebay! Let me know! Message me for a 20$ off!

Bump...

These would make nice high end power. If you installed the Titanium Hayabusa race valve springs you would never have a valve float not even with a money shift. The R&D on the Busa springs was amazing, they were stable at 25,000rpm per Metric Mechanic and I was the first to Road test them with similar cams you are selling. The cam profile has more duration which is the time a valve is open, the more duration you can run stable the more time you cylinder has to fill or empty it's combustion charge.

I give these cams a thumbs up.

John S