318ti.org forum (http://www.318ti.org/forum/index.php)
-   Misc (http://www.318ti.org/forum/forumdisplay.php?f=34)
-   -   weird problem (http://www.318ti.org/forum/showthread.php?t=34838)

HeavyStyle105 12-07-2011 05:27 PM

weird problem
When I went to put my driver window back on track a while back I had a problem gettin the plug to the power mirrors to come off the switch and all the wires came out of the plug. I was wondering if anyone can direct me to a wiring diagram for the power mirror switch, I've looked all over our forums and even googled the hell out of it but I can't seem to find a diagram showing what wire goes where in the plug. Please help I haven't been able to adjust my mirrors sense that happened.

cooljess76 12-07-2011 08:49 PM

Here's some old photos from my M3 mirrors DIY, perhaps they'll help:

otherwise, you should be able to look at your opposite mirror to see how it's wired:wink:

HeavyStyle105 12-07-2011 09:07 PM

Thanks but it's not the mirrors, its the interior mirror switch, the mirror adjust controls, or whatever the 4 way joystick kinda switch that I'm having problems with. All the connectors that are supposed to be housed in a solid plug came out and I don't know what wire goes where in the plug. I will try and get a picture of what I'm talkin about to give more clarity on my problem.

cooljess76 12-07-2011 09:15 PM

oops, no worries. Give me 5 minutes, I'll take pics of mine.

cooljess76 12-07-2011 09:51 PM

2 Attachment(s)
Here ya go:

HeavyStyle105 12-07-2011 11:15 PM

Thank you so much I've been lookin for this for almost two months now. Your a life saver

cooljess76 12-08-2011 12:58 AM

No worries.

Chapter 12-36 in the Haynes manual has the electrical schematic/pin-out for '95 and earlier typical e36 power mirror switch. 12-47 for '96 and later typical e36 power mirror switch. But it doesn't specify for the 318ti.

The Bentley manual adresses the 318ti specifically. ELE-242 in the Bentley manual has the schematic and pin-out for the 318ti power mirror switch.

Sometimes the internet just doesn't have it and you gotta refer to the book:wink:

HeavyStyle105 12-08-2011 01:37 AM

Thanks a lot man your a great help

Giant_Jonny 01-24-2012 08:39 PM

Found this today and this was clutch! Hey Heavy, when you assembled it does your work? Mine clicks, but does not move.

HeavyStyle105 03-26-2012 09:47 AM

I had to replace the fuse, its one of the mid 20s.

bcp 10-23-2021 01:56 PM

Found and used this thread today - thanks!!

All times are GMT +1. The time now is 10:54 AM.

vBulletin Version 3.8.8
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2022, 318ti.org