low mile z3 exhaust Has anyone fitted a z3 exhaust to their ti? I have a line on a low mile OEM cat back from a 1.9L z3 for stupid cheap and even though I don't need one now I know I will soon enough since mine is the original '97 exhaust. TIA |
It fits but its not bolt on... So I bought it last Jan. anyway since it looked sooo very similar (and was $30). It is physically about 4" too short. The secondary muffler/resonator and the under-rear-suspension-crimp dimensions and hangers are identical to the ti. So I had my guy cut/flare and weld the pipe about 5" behind the connection flanges behind the cat-converter (which were horribly rusted & a PITA but replaced the hardware anyway)and plumbed it up. Its great, maybe just a pinch deeper note then the 15 year old rotted OEM ti muffler it replaced (and obviously quieter). The flattened oval tip from the Z3 fits the non-M TECKNIK rear bumper w/o modification w/ ~3/8" clearance. No vibration or rattle so far! |
good deal buddy I am about to do some exhaust work on mine myself |
All times are GMT +1. The time now is 11:55 PM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org