My euro ///M332ti Hey :) Finally found a decent forum ;) From Norway as topic says. Love BMW :) Previously had a 95 E36 318i 4 door with M50turbo, 352whp and 410wnm. Sold the engine, rebuilt it to M3 3.0 and sold it.. Really miss it.. :) Me and a friend at a racetrack https://www.youtube.com/watch?v=Diy7AUSBqu8 And me on the way home :p https://www.youtube.com/watch?v=leYSeMbLEdw But now ive started to build a compact :) Got myself a 99' 316i with the lovely color Sienared2. Going to make ready for the track, but still a dailydriver. Heres a little pic of it :) Going to make a projectthread about it later :) http://img.tapatalk.com/d/14/04/10/arury2yt.jpg And a little tease :p http://img.tapatalk.com/d/14/04/10/yzebu4y9.jpg |
Love the color! welcome to the org |
unusual and rare color for a ti :cool: |
Nice car, but why did you sell the turbo M3?!?:eek: |
Congrats! Lookin good. |
2 Attachment(s) Thanks :) dont ask, should have kept it :p miss it alot. But the compact is going be a nice car too :) Almost done now :) exhaust finished, just need to bleed brakes and clutch, and put on my new h&r monotube coilovers :) sorry for bad pictures :) Attachment 14933Attachment 14934 Sent fra min HTC One_M8 via Tapatalk |
New pics:) love the way it runs! S50B32 with 6 spd <3 Z3m rear and m3 3.2 front :) http://img.tapatalk.com/d/14/09/05/qu3umy5a.jpghttp://img.tapatalk.com/d/14/09/05/a2umenet.jpghttp://img.tapatalk.com/d/14/09/05/pa2epa5y.jpg Oil pump upgrade and arp for rods. http://img.tapatalk.com/d/14/09/05/sajatedy.jpg Bushings for Main fram and for arms :) http://img.tapatalk.com/d/14/09/05/ta6y5emy.jpghttp://img.tapatalk.com/d/14/09/05/y3uru4uh.jpg http://img.tapatalk.com/d/14/09/05/8u7e7ese.jpg Me and my friend on our way to germany :) e30 fully rebuilt, m50b25, e30 m3 5 bolt :) http://img.tapatalk.com/d/14/09/05/huneruqu.jpg |
Nice start =) |
Dig the color and the look, but style 32's seem to be over done. |
2 Attachment(s) Thanks guys :) What do you mean by over done ? Got new rims waiting for tires. Bbs rt107 8x17 et20 :) And more low will come :) Attachment 15590 Style32s will be used for track with federal 595rsr Another picture from last year. Attachment 15591 The car is also approved rebuilt by the Public Roads Administration with all the parts :) |
For Compact's it seems that everyone does Style 32's. I have done them myself. Very common choice wheel. They are one the factory's heavier wheels too. Glad to see you upgraded the brakes. What did you use? Fronts look like E36 M3 and rear use Z3M? |
Ahh, i see.. yes, they came with a compact i had earlier. Used them last year when i goteverything approved, due to right offset :) Correct, M3 3.2 front and complete Z3M rear axle :) Had to use this combo to get it approved :) Sent fra min HTC One_M8 via Tapatalk |
You can't fault that set up. More than adequate braking plus replacements are not that expensive. |
sub'd . |
Quote:
And as you say, the biggest plus is easy access to parts and not that expensive. The z3m uses exact the same disc, pads and Caliper as m3. What I don't like is the diff ratio. 3.15 is very long.. gonna replace it with 3.64 soon ;) I use the 6 spd so ill still have lower rpm in 6th with 3.64 than with 3.15 and 5th. 5 and 6 spd are the same ratio all the way up to 6th.. :) Quote:
I just realized that you had rt107 on the white.. very nice ;) Sent fra min HTC One_M8 via Tapatalk |
All times are GMT +1. The time now is 03:36 PM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org