OBD1 to OBD2 (Quick Question)
 

i will most likely be getting my brother's '95 T.I. with over 300k miles. the engine still runs strong, but i was slightly concerned of the future in case this thing finally goes. my dad has a 318 OBD2 engine, and i was interested in switching these out, but honestly, i dont have a clue as to how to do this thing. a little help as to what is necessary to pull an OBD1 engine and drop in an OBD2 engine???

Welcome to the site, feel free to use the search tool, or navigate to the swap section to see if your problem has been addressed.

http://www.318ti.org/forum/forumdisplay.php?f=26

300k is a lot, but there are others with the same mileage that still run fine, I wouldn't recommend that engine swap, too much trouble for not enough of a gain, either leave the engine in it, get another OBDI 318 engine or get a 6 cyl.

alright, sounds pretty good. it was originally owned by my dad, and was always well maintained. mobil 1 synthetic oil, all the good stuff. everything was very well kept, so i didnt think that there would be any problem. it was just a concern of the future. but i have been looking around in town and on eBay for an engine in case i find one. and what do you mean by 6-cylinder? i was under the impression that a 325 would fit, also, but wasnt sure...