FS: E36 Brakes, rotors, springs, etc. Accepting reasonable offers; I'll entertain unreasonable offers as well. Hawk HT-10's for E36 vented front rotors (non-M); new in box https://lh3.googleusercontent.com/iL...7woTN3Hc=w2400 https://lh3.googleusercontent.com/I0...-8sw-bz8=w2400 Centric E36 vented front rotors (non-M) https://lh3.googleusercontent.com/zB...1MEpwV70=w2400 TCKline front coilovers springs - 400lb/in, 7in, 60mm, used https://lh3.googleusercontent.com/C_...06awFFvQ=w2400 TCKline rear (beehive) springs - 600lb/in, standard length https://lh3.googleusercontent.com/6R...fqlUDCaM=w2400 Vorschlag poly (black) m42/m44 motor mounts for E36, never installed https://lh3.googleusercontent.com/zm...BUeAre_s=w2400 Turner RSM's, aluminum with bushings, used https://lh3.googleusercontent.com/Qh...-ZKVpPcU=w2400 Thanks in advance! |
Interested in the Rotors and poly motor mounts. Able to send pics of the rotors? I'm assuming they're a direct swap, or are they wider than stock? mjschwartz24 at gmail |
Quote:
|
Total streetcar - not planning on autox. I currently have slotted rotors in the front that probably need to be turned, but I have no plans on changing the calipers. Still interested in poly motor mounts (mostly because I think the fluid in my rubber ones is leaking) |
Make offers on any of this stuff - just sitting around, unused, unloved. Someone's gotta want some nice front brake pads and rotors at least... |
How much for the motor mounts? |
Quote:
|
What would you take for the rotors & pads. Don't really think I can use them because the car is mainly an AutoX car that I have to drive to & from events and they are not really good for street use as I understand. But if the price is too good to pass up... maybe. |
Quote:
|
All times are GMT +1. The time now is 03:27 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org