WTB: caliper carriers for vented rotors
 

like the title says, they were on ti's made after April '98

cross reference taken from realoem
Part 34106758104 (BRAKE CARRIER) was found on the following vehicles:

E36:
E36 318i Sedan
E36 318is Coupe
E36 320i Sedan
E36 325i Sedan
E36 325is Coupe
E36 328i Sedan
E36 318i Convertible
E36 325i Convertible
E36 328i Convertible
E36 318ti Compact
E36 323i Coupe
E36 323i Convertible
E36 328i Coupe

E46:
E46 320i Sedan
E46 323Ci Coupe
E46 323i Sedan

E85
E85 Z4 2.5i Roadster

Z3:
Z3 Z3 2.5 Roadster
Z3 Z3 2.5i Roadster
Z3 Z3 2.8 Roadster
Z3 Z3 2.8 Coupe

Im glad to know we dont have to upgrade the calipers to. I checked the part numbers to make sure they are the same. I looked online to see if you can buy these new and pelican parts has them for about 150 each!! Let us know if you can find a good deal anywhere? I see e46(e36 in your case) 325I calipers with carriers on sale used and remanufactured for around 40-50 maybe some places will separate. I may just buy the e46 calipers since they should be newer and in better shape, saves me from having to buy a rebuild kit since they are remanufactured. Good luck getting everything ready while staying on budget.

I don't see a vented disc fitting in a solid rotor caliper, could be wrong though.

Just posted this in the other thread to, $25ea from bavautorecyclers with 6mo warranty. Thats what I got mine for anyways.

ive got entire swap with rotors and hawk hp+ pads..

Vented disks DO fit in the ti calipers. Only the carrier is different. Even the pads are the same between the vented and solid rotors.

are you sure? as in you've done it yourself or can point me to another thread where it's been done? realoem lists different numbers for the calipers but I'd rather not spend more money than I have to

eh, screw it, I just bought a set of calipers from another member here, I'll experiment while I'm installing it and I'll post the results