Clear the Garage sale
 

The racing season is upon us, and I'm making another effort to clear out the garage. I've got the following for sale:

Ground Control Coilover SA Konis, 375/450 Springs (need spring perches from GC to make a full set!) 400
Eibach Springs (2) 8"x2.5" 500lb/in 50
Stromung Exhaust for 318ti 300
Exhaust Center Section for 318ti with gutted cat 20
M3 Front Springs 40
318ti Airbox and AFM 50
318ti Airbags (both sides - never used) 200
318ti Interior (rear + panels) 300 (pic1)(pic2)
318ti rear wiper motor 25
318ti stock radio - (free with any purchase)
318ti Seatbelts (all) 50
318ti ECU (stock chip) 75
318ti Airbag Control Module 75
318ti Driver's Side lower belt adjuster (common to all e36s) 25
Gtech Pro RR edition (new in box) 250

Buyer pays shipping and packing, which can add up if you're on the east coast. Reply to the post if you'd like details, but please email me if you think you want anything. I'm putting this list up in a few places, and may not check every forum every day.

Thanks!

how much for just the panels shipped

matching your interior to your seats?

possibly.... not sure yet if i sell my car i may not change them.

but i got some tax returns and a good paying job so i got money to burn :)

i think i will keep to my club sport plan

just pm'd you. ready to buy NOW!

Do you have a pic for the (Exhaust Center Section for 318ti with gutted cat)? Will this have to be welded on or does this attach some other way? My cat is rattling on my 95 ti.

Thanks

Mark

exaust
 

hey, do you still have the exaust? I live in SF could pick up.

$300 for a stromung? hmm.... is it a 2.25" diameter? wonder how long it'd take me to get to san jose from LA....

I had talked to Andy before about buying his exhaust system, but it never worked out due to the distance and I got one through the group buy. The center cat is a stock Ti catalytic converter that had a hole cut in the bottom to remove the "internals" of the cat. The piece was then welded back on to seal it back up. It should connect just like a stock catalytic converter. No welding needed.

From what I can remember his exhaust is also just a standard stromung 318ti exhaust. The only ones that had bigger piping were the 2 custom ones from the group buy last year.

I bought my conforti chip from Andy, so bumpy bump for a good seller.

Hi Guys,

Sorry - things got crazy this weekend.

Exhaust - yes just as Mo said. We found shipping it a long distance by UPS was very expensive. Both the center section and it bolt into stock locations, no welding required. With the center section, your car will be much louder than before...it's fun, as long as your state allows fun. CA doesn't. :rolleyes: My best time from Pasadena to South San Jose was about 4hr and 18 minutes in my old '89 integra...and that was when Pachaco Pass was still mostly 2 lanes and the national limit was 55. If either of you CA guys really want the catback, email me!

Angel - about the panels - let me take a look and see what I'd ask for just them. They're all in excellent condition, except one of the door's speaker surrounds is scratched. I have your email, and shall reply to you there today.

Thanks all!

Right - it's from the BF.C group buy circa late 2002 that the understeer.com guy organized. Just standard, but if nobody wants it, I'm going to see if I can squeeze it onto my 91 318is daily. It is completely daily drivable, but makes good noises when that M42 is tickling the far side of 6000 rpms where they belong. :)

is that GC kit for a 318ti/Z3 or regular e36?

How is the sound from the stromung exhaust? Do you still have it for sale? Just bought a 96 sport for 4k Jan. 2. First trip to the garage a bit over 4,500. Runs good now. I did alot of searching on this site before I bought. Wow I love the 318ti. I now see why you guys are all talking about them... they kick ass. sorry about being off subject. I can pick up the exhaust on the weekend if you want? Or ship to S.F.?