While I'd like to go 6spd budget doesn't allow for it currently. 4.10 is nice around town but at 65mph I'm at 4K. So I just drive slow right lane. I hope to be mostly done by end of May with it, save for minor bodywork. Brakes will be done in coming weeks. Rear suspension done this weekend. Sits to low for my personal pref and the stress on halfshafts. (HR Sport Z3 6cyl) I have one more spacer to add on spring pad but won't do enough. Will be testing out some new springs locally. Smoked rears added as well. http://i.imgur.com/hMNS3VXh.jpg http://i.imgur.com/e3RlnD3h.jpg |
Damn. Those springs are completely compressed! Only the small coils doing anything now. Do they bang on bumps being that tight? |
It's by design per HR. The Z3 forums have a few threads with people shocked, thinking they are broke etc. supposedly it's so the spring don't fall out. Either way I'd like to be higher in rear. Going to try Bav Auto springs next. Maybe go factory sport 6cyl Z3? They're easy enough to swap might as well mess around. With a medium diff and 4cyl stock haldshaft I don't wanna go to low though. Looking for e30 325i ones currently Sent from my iPhone using Tapatalk |
The big 'nipple' keeps the springs in... Unless you're doing Dukes of Hazard maneuvers I think they'll stay in. I'm running stock M Roadster in the rear of mine. I'm happy with ride, height and they haven't fallen out either! I did go with the heavier M Coupe rear sway due to the heavier body on the ti compared to the roadster. |
The pads even come with an adapter to lengthen the nipple. I'm going to assume it was for extreme situations but that's there design. I'll mess around with a few setups to find the right height. It does feel better then the 4cyl sports. |
Quote:
Quote:
The only spring that comes to mind that I might be willing to try is the IE "stage 3" rear springs, see if they sell those separately. I think in three weekends time I will have time to drive down and compare height with the OEM Z3M spring I have, if it looks okay height wise and IE is willing to sell me only the rear springs I might give it a shot. Best of course is to save up for a real coilover set.... or the Groundcontrol coilover conversion. BTW how come you don't use the e30 halfshafts? I didn't even know stock ti halfshafts worked with the med size e30 diff.... and that 4.1 seems too much for me!! I even mentally complain about my 3.46 sometimes. Quote:
|
Anassa - Noted on the Bavauto. Looking for different otpions now, maybe will try stock Z3M. Let me know what IE says and cost? I'd be interested in a rear set as well. As for rear halfshaft just have not gotten around to getting some and putting on. The 4cyl ones barely fit but they do. They have to be walked on somewhat. 15K miles on MI roads and still fine. You have any photos of the z3m springs on yours? Would you want to sell or does it have too much rake? |
Quote:
http://318ti.org/forum/showthread.php?t=42609&page=2 Post 27/28 to see how it sits And comparison between 1.9 z3, bavauto, stock ti: http://318ti.org/forum/showthread.php?t=34892&page=5 Post 66 I will keep you up to date on IE, but again that will be a few weeks, M-F is impossible and my next two weekends are full. But I will definitely keep you up to date. |
Anassa - Wow those stock Z3M springs are rather higher. Wasn't expecting it to be so tall. Let me know what IE says. Are you going for an E30 spring or Z3? I'll be putting the final spring pad in this weekend. |
Had some light exhaust work done. Currently SS longtubes, y pipe, 2.5" Magnaflow to MegaRacing muffler w/dual 3" tips. It's ok. I'd like to find either Mcoupe muffler or a Supersprint from other model and make work. It's quiet under 3K for most part, pops on a downshift but WOT above 3500 is stupid loud still. Sealed the paint this weekend with Griotts One Step Sealant. Very easy to use product, not a harsh polish but that is to be expected with an AIO product. Painted new nose panel, bumper, and brakes as well in garage. Painting was easy. Bought online color match paint. I made some goofs as this is the largest project I've done so far. Needs wetsanded and buffed since there is some orange peel. Thankfully with flat white it's not that noticeable. I would recommend getting 2K clear so it will set faster, apply overall better. But this was $7 vs $20 per can and I'm nearing the budget set aside for the car. Needs to touch up some body spots and small interior items. Buy E30 halfshafts, fix tune/misfire issue and should be 95% done. http://i.imgur.com/fXfvssHh.jpg http://i.imgur.com/jloEThXh.jpg http://i.imgur.com/rU3aUI5h.jpg http://i.imgur.com/zrKy2ich.jpg http://i.imgur.com/veVszfKh.jpg http://i.imgur.com/La0uVzSh.jpg http://i.imgur.com/La0uVzS.jpg http://i.imgur.com/IzCxgno.jpg http://i.imgur.com/GFUgmAg.jpg http://i.imgur.com/GSoOeXy.jpg http://i.imgur.com/mwGUB1c.jpg |
Happy 4th everyone. Got the front brakes done. SS lines, stock vented, stoptech sport pads. http://i.imgur.com/KjqVq9i.jpg http://i.imgur.com/FAGYanH.jpg |
Going is good. Stopping is better! |
Stopping is good. Setup is similar to before but with all new hardware I have somewhat peace of mind. The car won't be tracked and even rarely pushed on the street so a simple stock setup seemed to be most effective. Stoptech pads are dusty but effective one broken in. Got the new finder liners, brake ducts bumper and nose panel on. Bumper and nose panel are both Ebay so fitment is not that great. I can work it to close some of the gaps. Paint appears to match in most lighting which is great for the $20 per can. Roughly little more then a local shop would charge to can some matched paint. The fogs need some hardware and I need to solder in a new wiring then those will be in. Then I needs to tidy up the engine bay visually. Move the reservoir, sleeve some wiring. It's getting there. http://i.imgur.com/dqd038x.jpg http://i.imgur.com/JqLbd7g.jpg http://i.imgur.com/Z4SSsoC.jpg http://i.imgur.com/FsEfneI.jpg http://i.imgur.com/QaekXqN.jpg http://i.imgur.com/GmfxYUO.jpg http://i.imgur.com/M9S1m0f.jpg |
Looks great man! How's it handling the summers days? Are you happy as I would be with that swap?! Seriously does it drive better with the swap because honestly I love the way my M Sport handles and the gas mileage keeps me smiling! |
Quote:
about that. I'm already running 6cyl HR springs. It's a very easy car to drive around town. Do not need to wind out the motor like the 4. This is also due to 410 diff. I can say the easiest 318Ti I've driven has been a 6.0 LS swapped one. So much torque everything is effortless. Sent from my MotoG3 using Tapatalk |
All times are GMT +1. The time now is 08:41 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org