318ti.org forum (http://www.318ti.org/forum/index.php)
-   Exterior (http://www.318ti.org/forum/forumdisplay.php?f=22)
-   -   need door handle seal # and trunk seal under glass part # (http://www.318ti.org/forum/showthread.php?t=30169)

dguzzardo22 04-09-2010 06:26 AM

need door handle seal # and trunk seal under glass part #
 
i need the part numbers for the door handle seal and the seal under th back glass and the 2 outter doorseals.

dguzzardo22 04-12-2010 05:55 AM

does anyone know where can i buy them from ????

cooljess76 04-12-2010 10:58 AM

c'mon man, realoem.com for part numbers, pelicanparts.com or getbmwparts.com for parts:cool:

dguzzardo22 04-14-2010 05:42 AM

ive been searching and they have no diagrams. or it wont load for me ..

roadrash 04-14-2010 06:05 AM

Lucky for you, I happened to stumble upon this earlier today.
Left - 51-21-8-122-441
Right - 51-21-8-122-442

I don't know if that's just the cover, or if it includes the seal also. If you order them, please report back on that.

CirrusSR22 04-14-2010 06:31 AM

I am fairly sure BMW doesn't sell that door handle seal seperately. Someone, somewhere in S.E. Asia sells an aftermarket seal set on eBay. I've seen a lot of bimmerforums posts about buying from him.

I ended up carefully using black silicone. It's unoticeable from more than a few feet away and seals far better than the rubber piece will.

dguzzardo22 04-14-2010 07:03 AM

silicone huh . sounds like it might work ... but where is that ebay link ??? i caint find it.?

CirrusSR22 04-14-2010 07:12 AM

Yeah, the silicone isn't the prettiest solution, but my car is basically a utility vehicle now. It's effective.

Here's the seller. It's Malaysia; knew it was somewhere in that part of the world. $6.50 shipped! That's cheaper than I remember they were a number of years ago. Being that cheap, I'd just buy the seals I suppose.

http://cgi.ebay.com/ebaymotors/BMW-E...item518cbb2910

dguzzardo22 04-14-2010 09:05 AM

just ordered .. thanks now i ned a trunk seal and the 2 door seals ..

roadrash 04-14-2010 01:31 PM

From that E-bay page...
"These rubbers are not produced by BMW. If you do order from BMW, it comes with the door handle and will cost you even more. "

b.u.ti-ful 04-14-2010 02:03 PM


dguzzardo22 04-14-2010 05:41 PM

well that seems easy . just find a metal rod . push it , out comes the handle. replace seal . put handle in place . push rod back . and bam new seals .

roadrash 05-16-2010 11:19 PM

Quote:

Originally Posted by dguzzardo22 (Post 267512)
just ordered .. thanks now i ned a trunk seal and the 2 door seals ..

Have you installed the seals yet? How did they fit?

spidertri 05-17-2010 12:57 AM

I ordered a set from the guy in Malaysia, they fit and look great. It is a super easy install too.

dguzzardo22 05-25-2010 05:23 AM

im wainting to paint my car then install them . is there a easy way to install them or no?


All times are GMT +1. The time now is 12:28 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org