JohnBoy's Turbo Build I'm getting ready to start my turbo build and ordered a couple thousand in parts today. I only need $625 in odds and ends to compete my kit. I went pretty wild and will start posting specs and pictures as parts start arriving. I plan to pull the motor in mid July to remove the oil pan and mount everything. Should have all the bugs worked out by the end of July. Just a little taste:tongue: Turbo Specifications: MAX Up To 500HP. Inlet: 4 Inch. Outlet: 2.5 Inch. Oil Line:1/8 NPT Turbo Charger Flange: T3 Flange. Downpipe Flange: Standard 4 Bolts. Compressor Trim: A/R=70, Exducer: 56.83mm , Inducer: 74.96mm . Exhaust Trim: A/R 63, Exducer: 61.37 mm. Inducer: 69.86mm Cool Type: Oil Cool Only |
Oh no... not a turbo! :( What happens to your DASC now? Want to sell me your 3.0" pulley and water/meth injection kit real cheap?? |
this is going to be sick, looking forward to seeing what you can do, maybe you can start making kits? ;) |
Niiiiiiiice. I have been waiting for this thread.:twisted::twisted::twisted: This is going to be awesome! |
:yikes: |
madman :biggrin: subscribed... |
Quote:
|
***Update*** Purchased everything I can think of except a turbo timer and I'm still looking for a turbo blanket that covers the turbo to keep the heat inside it. All parts will be here over the next 7 days. All parts purchased for normal running adjustable 15-25psi of boost with peak boost of 30psi for maybe a few runs to see what heppens:biggrin: This is going to be fun... |
Quote:
|
hey johhny, might be interested in the dasc when you put it up, are you gonna sell the whole thing or use some of the kit? |
Quote:
|
ahh well mines a m44 so the tt stage 3 stuff wouldnt do me much good, but we have another ti with a dasc down here so we may be interested in the pulleys also, just gimme a heads up when you sell it and ill see if we want it |
sickkkk, how much in parts? |
Quote:
|
Quote:
|
Quote:
I'm excited!! This turbo is similar to a GT35R with a exhaust A/R .63 for faster spool I purchased cheep so I could try a few different turbos and when I find the best size, I will purchase that size in the expensive Garrett BB turbo at $1,200~$1,500. |
Our favorite Madman is at it again!!! Go John! |
Quote:
|
What are you going to do for tuning? Standalone? |
Quote:
|
if ur tuning works fine im gonna go turbo too yeahhh i love turbo sounds |
Intercooler 31 x 12 x 3 (Delta Fin 3" 50% lighter then bar & plate 20% better cooling then bar & plate) http://i222.photobucket.com/albums/d...rcooler002.jpg http://i222.photobucket.com/albums/d...rcooler003.jpg |
Stand-Alone ***Stand-Alone*** Well I've decided I'm going to need a stand-alone to tune this correctly. It's going to be a TEC-GT or a MegaSquirt integrated onto the Motronic M5.2 DME. Both have good and bad. TEC-GT ~ Good: better tuning, user friendly and it's a TEC. Bad: price way more then I want to spend, not plug and play for M44, A/C control?, OEM Gauges?, OEM sensors? Does not retain any OEM functions. MegaSquirt/integrated M5.2 ~ Bad: Harder to tune, not as many options as the TEC. Heard not reliable for long drives, burns out parts. Good: Cheep price, Plug and Play, uses all BMW sensors, all gauges work, A/C controls normal, CEL works, DISA works, retains most OEM functions but adds unlimited DIY tuning (just what I need) I think I'm going MegaSquirt with ignition drivers if I'm able to graft one into the stock DME:eek: |
nice |
i have megasquirt for my m42, just havnt built the motor or put anything together yet |
Quote:
I heard from a reliable source he helped tune a car and on a 1,500 mile trip and it left the owner stuck 500 miles away from home. Today I looked around on the web at articles and posts and found people recomending MS increase the watts on certain parts on the unit since they were buring out. The home page and instructions say say several times: MegaSquirt teaches you how to tune (Cool :cool:) and you will learn how to diagnose and repair failures (un-cool :mad:). Am I just paranoid and all that was growing pains from years ago that have all been worked out? Is the "Squirt" good enough for lots of daily driving? I have to have reliablity & like the tec3 but think $3K is just plain stupid |
From everything I have read, there are no issues with parts 'burning out'. Lots of people have run the 6cyl bmw's with MS without issue. I have not run it yet, I just have everything sitting around waiting for me to get some free time. |
John... I lurk on whoretex often & a lot of those boys go megasquirt way. Not sure if all I hear is good. Just type 'megasquirt' and some stuff will pop up... but if you go to individual model forums I'm sure you can get more. http://forums.vwvortex.com/zerosearch Quote:
|
***Intercooling Piping 3"*** http://i222.photobucket.com/albums/d...rPiping001.jpg http://i222.photobucket.com/albums/d...rPiping004.jpg |
***Injector Upgrade 60#*** Getting ready to order injectors for fuel delivery. Mertric recomends Sieman Deka 60lbs.:eek: Also this afternoon they are going to recomend a sequential stand-alone that is custom built for my application at a fair price. Install target date is still first week of July:tongue: Should have Turbo & Waste Gate today or tomorrow |
who makes this sequential standalone ???? |
Quote:
|
can't wait to see this baby running. GL with everything |
Been sicker then a dog since Friday afternoon. I've got all Turbo parts in except the OBX manifold, turbo blanket and fuel/timing control. Trying to get my brother in law to drive me to the track this Wednesday so he can make a few passes :wink: before I start tearing it down for the turbo. If there is no rain I will film video. Should put down some good numbers with a decent tune on it now. Still a little fat but acceptable at 10.7-11.3. Timing will stay at 12 degrees total advance above 3,500. Never did get a final tune completed so I will run what was the best tune I had to date... I had my DMV hearing last week and I find out this Thursday if I get my license back 100% or loose if for 4 more months:frown: |
[B]ONLY MINOR THINGS MISSING BEFORE INSTALL[B] I will receive my OBX manifold Wednesday and turbo blanket tomorrow. I'm going to stick with the DME I currently have until I get her running on the turbo. I should be stable to 20psi on the DME:eek: Here are some more pictures: Part from Friday delivery. Take special note to the Fast and Furious BOV:biggrin: http://i222.photobucket.com/albums/d.../TurboKit1.jpg Turbo. Completely dis-assembiled by me and reconfigured then put back together. Ebay special:rolleyes: http://i222.photobucket.com/albums/d...d/Turbo011.jpg Waste Gate 44mm. Good quality. Some please tell me what that is in the left bottom corner cause I can't figure it out. http://i222.photobucket.com/albums/d.../WasteGate.jpg |
Fast & Furious BOV...It was free:tongue: http://i222.photobucket.com/albums/d...0Build/BOV.jpg Oil line kit. All Turbo fitings http://i222.photobucket.com/albums/d...uild/Timer.jpg |
Quote:
|
a twin you absorbed in the womb? |
^^ I can't figure it out, I'm 6'2" 190. I don't have a gut and I have scars from surgeries that would show. I mean do I really look like that?? My wife looked at that and says you got "Dicky-Do". "Your stomach sticks out more than your dicky-do" Jokes on me:eek: |
Jokes on you all and the wife. I figured it out. Turn you head to the right and look at it. It's my knee with my super large muscles from riding my bicycle around for 3 months. Ha Ha |
All times are GMT +1. The time now is 02:37 PM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org