E30 3.73 LSD
 

Hey everyone, I am considering getting an auto to manual swap done soon and would like to get an LSD in the process, I have considered an E30 3.73 LSD, and i'm wondering what all will be needed in order for the diff. swap to work, from reading various posts on here i assume that i will need the 3.73 LSD(obviously), E30 half shafts, MZ3 finned differential cover, and a z3 speed sensor. Are these all the parts i'd need, or are there a few things that i am missing please, Thanks!

This question has been answered a hundred times. I'll just say that you're wrong on your assumptions, try again.

http://www.318ti.org/forum/forumdisplay.php?f=32

thanks for the link, i found a write up that had what i was looking for, I appreciate your help