318ti.org forum (http://www.318ti.org/forum/index.php)
-   Lounge (http://www.318ti.org/forum/forumdisplay.php?f=19)
-   -   Riddleyo's Autocross 318ti (http://www.318ti.org/forum/showthread.php?t=42582)

riddleyo 06-05-2016 01:58 AM

Riddleyo's Autocross 318ti
 
Riddleyo's Autocross 318ti


The Car:
1997 BMW 318ti BLACK

The Goals:
Ultra Grip!
Autocross!

The Background:
I race with a club in Xenia, Ohio called the Miami Valley Sports Car Club. I will be racing this BMW starting in the 2016 season. If you are interested in coming to see the car, go to our website and show up to an event or two. This BMW is my 4th autocross project and have had countless Toyota projects in the past. This is my first foray into BMW - but I have no fear because I remembered to bring my wallet. I will document the work I do to the car and I welcome my competitors here, no secrets to hide!

The Story:
Picked this car up in early 2016 to replace my previous autocross car. Here it is the day I towed it home. I needed a change from the underpowered Toyotas of my past and I'm ready for some German muscle:
http://i1138.photobucket.com/albums/...%20318ti/1.jpg

The Good:
The car came with plenty of goodies including a Downing Atlanta Supercharger and polyurethane bushings throughout. M-sport aerodynamic exterior bits and good looking paint.

The Bad:
Disconnected sunroof drains had to be fixed. It also needs a suspension refresh as the rear suspension bushings are toast. Perfect starting platform for an autocross car!

The Build:
The first thing that needs to be done is to fix the suspension. Without further ado, it begins:
http://i1138.photobucket.com/albums/...%20318ti/2.jpg

Subframe has been dropped. No pics, I was too busy cursing and wrestling with the weight of the assembly. Top it off with bent and corroded subframe bolts which made removal very difficult.
http://i1138.photobucket.com/albums/...%20318ti/3.jpg
http://i1138.photobucket.com/albums/...%20318ti/6.jpg

Some shots of the undercarriage post subframe-ectomy:
http://i1138.photobucket.com/albums/...%20318ti/4.jpg
http://i1138.photobucket.com/albums/...%20318ti/5.jpg

Bare rusty salty subframe:
http://i1138.photobucket.com/albums/...%20318ti/7.jpg
http://i1138.photobucket.com/albums/...%20318ti/8.jpg

riddleyo 06-05-2016 02:12 AM

The previous owner installed Ireland Engineering eccentric camber/toe bolts. They were rusted to hell and combined with shot rear trailing arm bushings, the whole crap setup had to go. Had to use a cut off wheel to fight through the corrosion and this is what is left:
http://i1138.photobucket.com/albums/...%20318ti/9.jpg

After some wire wheeling, the subframe starts to clean up:
http://i1138.photobucket.com/albums/...20318ti/9a.jpg

I am pretty anal about the little details and dirty nuts and bolts drive me crazy. This is how they look at first:
http://i1138.photobucket.com/albums/...20318ti/10.jpg

I've had fantastic results with EvapoRust. It is commonly found at Autozone, NAPA, wherever. It is a non-toxic chelating agent that eats through rust like no other. It is NOT an acid or an etcher, so it works well to remove rust but does not fully prepare for paint.
http://i1138.photobucket.com/albums/...0318ti/10a.jpg

The result is striking. Clean metal, almost looks like new hardware and I put NO effort into this. I simply dumped these into a plastic container with EvapoRust and pulled them out the next morning. NO WIRE WHEEL NEEDED!!! (I'm don't sell EvapoRust, I just love the results)
http://i1138.photobucket.com/albums/...0318ti/10b.jpg

Another product I use to combat rust is phosphoric acid. The brand is Klean-Strip and I found this product at Home Depot. This acid etches the metal and dissolves rust in a very caustic manner.
http://i1138.photobucket.com/albums/...0318ti/10c.jpg

The reason I use etcher is to prepare the metal for paint. Here is some hardware before:
http://i1138.photobucket.com/albums/...20318ti/11.jpg

Afterwards the rust is dissolved and a white flaky acid powder residue remains:
http://i1138.photobucket.com/albums/...0318ti/11a.jpg

After prep, I start painting with POR-15. A great paint that is brushed on and prevents rust from returning. Very durable and low odor.
http://i1138.photobucket.com/albums/...20318ti/20.jpg
http://i1138.photobucket.com/albums/...20318ti/23.jpg

Here is some of the hardware drying.
http://i1138.photobucket.com/albums/...20318ti/24.jpg

riddleyo 06-05-2016 02:28 AM

Now I turn attention to the trailing arms.
http://i1138.photobucket.com/albums/...20318ti/13.jpg

After burning out the old worn bushings, I flap wheel the inside surface with a dremel.
http://i1138.photobucket.com/albums/...0318ti/13a.jpg

Wire wheel the surface of the trailing arm to prep for paint:
http://i1138.photobucket.com/albums/...20318ti/14.jpg

And then acid etch with phosphoric acid:
http://i1138.photobucket.com/albums/...20318ti/15.jpg

I also etched parts of the undercarriage:
http://i1138.photobucket.com/albums/...20318ti/16.jpg
http://i1138.photobucket.com/albums/...20318ti/17.jpg

After some POR-15 on the trailing arms, they turn out fantastic. The surface is very durable. I can strike with a hammer and it bounces off the POR with no damage.
http://i1138.photobucket.com/albums/...20318ti/21.jpg

Subframe looks great as well:
http://i1138.photobucket.com/albums/...20318ti/22.jpg

Now it is time to work on the Subframe's trailing arm boxes. I ordered Ireland Engineering's "Positive Lock" Camber and Toe adjusters. Honestly I am not too impressed with Ireland Engineering's customer service. These were on backorder for a long time. However, these are well made pieces but are very costly. Here is what your receive:
http://i1138.photobucket.com/albums/...20318ti/25.jpg

Now I level the subframe:
http://i1138.photobucket.com/albums/...20318ti/26.jpg

And I start the mockup process:
http://i1138.photobucket.com/albums/...20318ti/27.jpg

Now I use cardboard engineering and make templates that will reinforce the camber and toe plates:
http://i1138.photobucket.com/albums/...20318ti/28.jpg
http://i1138.photobucket.com/albums/...20318ti/29.jpg

Transfer the templates to good old American Steel!
http://i1138.photobucket.com/albums/...20318ti/30.jpg

I use white out and lay out where I need to grind in preparation for welding:
http://i1138.photobucket.com/albums/...20318ti/31.jpg

riddleyo 06-06-2016 02:03 AM

It was a sunny day today and I got a lot done. First, used a grinder to prepare the subframe for welding:
http://i1138.photobucket.com/albums/...20318ti/32.jpg

Bare metal is good:
http://i1138.photobucket.com/albums/...20318ti/33.jpg

All the cardboard templates have been transferred to steel and cut out and labeled:
http://i1138.photobucket.com/albums/...20318ti/34.jpg

Now to mock up the toe and camber plates again, being sure to keep everything level and square:
http://i1138.photobucket.com/albums/...20318ti/35.jpg

After a little bending and grinding, the steel reinforcements are complete. These will be essential to keeping the toe and camber plates from shifting under the high loads the car will experience during cornering with race slicks.
http://i1138.photobucket.com/albums/...20318ti/36.jpg
http://i1138.photobucket.com/albums/...0318ti/36a.jpg

Welding will take place another day. To finish up today, I painted some more of the undercarriage with POR-15 after etching with phosphoric acid. This car will have no rust by the time I am done with it - and will stay rust free for years to come.
http://i1138.photobucket.com/albums/...20318ti/37.jpg

BlackBMWs 06-06-2016 05:22 AM

Thanks for posting this. I am looking forward to following this thread. Cheers! :cool:

stevenwrichards 06-07-2016 07:05 AM

Must follow. Finishing up my Ti in Ann Arbor, plenty of extras if you need anything.


Sent from my iPad using Tapatalk

anassa 06-08-2016 01:37 AM

Quote:

Originally Posted by riddleyo (Post 380881)
I needed a change from the underpowered Toyotas of my past and I'm ready for some German muscle:

Wants German muscle --> buys a 318ti. :confused::confused:

Oh the irony! If this wasn't 318ti.org people would of had fun with that part!

That being said, it looks like a good project, you also seem to be well prepared!

Good luck. :biggrin:

BlackBMWs 06-12-2016 03:24 PM

I'm interested in more detail about the reinforcement tabs you made for the subframe if that is possible. I have a spare subframe I can prepare as well.


Sent from my iPhone using Tapatalk

riddleyo 06-16-2016 11:29 PM

Quote:

Originally Posted by anassa (Post 380925)
Wants German muscle --> buys a 318ti. :confused::confused:

Oh the irony! If this wasn't 318ti.org people would of had fun with that part!

But.. but... it's supercharged! Maybe when I get tired of battling the miatas, I'll put in the straight 6.

Quote:

Originally Posted by stevenwrichards (Post 380915)
Must follow. Finishing up my Ti in Ann Arbor, plenty of extras if you need anything.

I'll keep ya in mind, thank you.


Quote:

Originally Posted by BlackBMWs (Post 380973)
I'm interested in more detail about the reinforcement tabs you made for the subframe if that is possible. I have a spare subframe I can prepare as well.

I just made them up as I went. I put two tabs on the side of each toe plates and camber plates. For the camber plates, I put a plate in the middle to reinforce it further. Welded them up just like pictured in the previous post. Welds aren't the prettiest, but they are strong as hell. The plates were oriented to reinforce the tabs against lateral loads which will be encountered in autocross. Here is how it looked shortly after welding the tabs in:
http://i1138.photobucket.com/albums/...20318ti/38.jpg

Here is a closeup of the passenger side toe adjustment plates (pictured right), and camber adjustment plates (pictured left):
http://i1138.photobucket.com/albums/...0318ti/38c.jpg

Now here are the driver sides:
http://i1138.photobucket.com/albums/...0318ti/38d.jpg

Another view, this time on the other side of the driver side adjustments:
http://i1138.photobucket.com/albums/...0318ti/38a.jpg

The two camber adjustments, driver side on right, passenger side on left:
http://i1138.photobucket.com/albums/...0318ti/38b.jpg

And the whole subframe, welding is complete:
http://i1138.photobucket.com/albums/...0318ti/38e.jpg

Next, I prepped and painted the subframe with POR-15. I avoided the serrated surface so that the thickness of the paint does not physically interfere with the serated interfaces:
http://i1138.photobucket.com/albums/...20318ti/41.jpg

http://i1138.photobucket.com/albums/...20318ti/43.jpg

http://i1138.photobucket.com/albums/...20318ti/42.jpg

Now, this weekend, I hope to make some progress on installation. In the meantime, the paint is curing.

anassa 06-18-2016 01:56 PM

Quote:

Originally Posted by riddleyo (Post 381039)
But.. but... it's supercharged! Maybe when I get tired of battling the miatas, I'll put in the straight 6.

The DASC will definitely give it some umph! Also it can also be made to have decent power while keeping the front relatively light. Something else you might want to consider and will make a noticeable difference is a z3 steering rack! Those tight corners will be a lot easier to navigate.

Keep it up!

riddleyo 06-25-2016 03:48 AM

Delrin trailing arm bushings from Ireland engineering getting greased:
http://i1138.photobucket.com/albums/...20318ti/44.jpg

Using a 6" C-clamp to press in the bushing pin into the trailing arm:
http://i1138.photobucket.com/albums/...20318ti/45.jpg

First trailing arm installed:
http://i1138.photobucket.com/albums/...20318ti/46.jpg

Both installed. On the right you can see my brand new race rubber: BF Goodrich RE-1s
http://i1138.photobucket.com/albums/...20318ti/47.jpg

Using a brake line bender to bend new brake lines to match the OEM shape. I believe they ended up being 30" total for both the rear lines. By the way, I had to undo this bend after I took the picture because I forgot.. you MUST have the fitting located at the end of the line before you put the first bend in!
http://i1138.photobucket.com/albums/...20318ti/48.jpg

Plenty of anti-seize on the subframe bolts to prevent future corrosion. This is over top of a POR-15 coating which will prevent ANY future corrosion from occurring.
http://i1138.photobucket.com/albums/...20318ti/49.jpg

My dad came over on Father's Day to help me install the subframe. We devised a ramp using wood planks and two jacks. Worked like a charm but wow, was it heavy. Wrestling the differential in was a trip as well. Great way to spend Father's day though.
http://i1138.photobucket.com/albums/...20318ti/50.jpg

Going up
http://i1138.photobucket.com/albums/...20318ti/51.jpg

Raising into place
http://i1138.photobucket.com/albums/...20318ti/52.jpg

AND IT'S IN!
http://i1138.photobucket.com/albums/...20318ti/53.jpg

Ireland Engineering's rear coil adjusters. They aren't as high quality as ground control sleeves and they use a basic "grub screw" which eats up the threads as you tighten it. However, it does the trick and allows me to fine tune the rear ride height. It also utilizes tiny 2.25"x5" coil springs which can be had at almost any spring rate imaginable... and cheap! I got some Eibach 0500.225.0500 springs which gives me a spring rate of 500 lbs/in. Pretty stiff for autocross, should work well for some on demand power on oversteer. There is nothing like steering with the throttle and you just have to experience it to know what I'm talking about!
http://i1138.photobucket.com/albums/...20318ti/54.jpg

All up
http://i1138.photobucket.com/albums/...20318ti/55.jpg

Took some time to polish my exhaust with some steel wool and metal polish:
http://i1138.photobucket.com/albums/...20318ti/56.jpg

Polished Strömung Stainless Steel exhaust tip:
http://i1138.photobucket.com/albums/...20318ti/57.jpg

So at this point, the car is complete, just in time for this weekend's race, and loaded up on my trailer. The Ireland rear camber adjusters were a breeze to set up a guesstimate alignment. The rear coil adjusters made it so simple to adjust the rear ride height and I don't even have to take off a wheel to adjust the ride height!!! So simple.
http://i1138.photobucket.com/albums/...20318ti/58.jpg
http://i1138.photobucket.com/albums/...20318ti/59.jpg
http://i1138.photobucket.com/albums/...20318ti/60.jpg

These RE-1s are road racing compound but were cheap enough to use as break in tires for the season. The car's first race is this Sunday and I barely got it all together in time. We will be racing at Wilmington OH at the airport on June 26th, 2016, if any locals want to come out and watch. Till then!
http://i1138.photobucket.com/albums/...20318ti/61.jpg

riddleyo 10-21-2016 01:38 AM

After a great season, I think it is time for me to move on to the next autocross project for next year. I need to move up a class and this beautiful BMW is now for sale. Pretty much all the problems are fixed with the car, it will make a good looking daily driver for someone.

http://www.318ti.org/forum/showthread.php?t=42803

BlackBMWs 10-21-2016 03:50 PM

Posted up on FB for a few friends who may be interested... GLWTS Nice job overall. :cool:

BMW_Hatchback 10-21-2016 05:05 PM

Loved reading through your subframe refresh. Thank you for sharing and GLWS

b0m 10-21-2016 10:14 PM

Internet people don't understand the love: http://jalopnik.com/for-6-499-could-...and-1787874730

GLWS!


All times are GMT +1. The time now is 09:39 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org