Which injectors for DASC mapping
 

Hi, I want to upgrade from the RRFPR to bigger injectors and mapping. What injectors should I be using? I know I want a flow rate of around 30lb (315cc/min), with high impedance injectors. I guess EV1 type would be easier to fit, and with jetronic connectors. I see the standard injector is a type E spray pattern, which is to the side, would a standard cone spray be ok? What have people tried out?

I see the standard length is 79mm long, with the adapters in place would 77mm be about right? Can the fuel rail be spaced upwards, but not down?

Cheers
Dylan

42LB bosch lime top are the best upgrade w/ software

Unfortunately I have a Downing Atlanta supercharger with the custom manifold therefore going to have to do something with adapters :(

can anyone that has nicks dasc stage 3 upgrade confirm what poundage the injectors are for me as i've had mixed info and wanna get this right before an order is placed

has anyone used these with the dasc? and if so what bmw are they from?

Yes many people use them and they are from a Mustang not a BMW :eek:

oh :redface: dont suppose you could post a link to some as i have no idea when it comes to injectors

The NickG stage 3 tune comes with 30lbs injectors, the 42lbs injectors would require a different tune(midnight?)

cheers buddy exactly the answer i was looking for! :biggrin:

i also mistakenly bought the UK 95 m3 maf which is 3.5" instead of the US m3s 3.0" does anyone know wether or not this would work ok with the stage 3 tune?

You need the 328 MAF dude.

You need a 1995 M3 or 328 MAF. It has to be a 1995, no other year MAF is plug and play like the 1995.