318ti.org forum - View Single Post

SDKmann · 01-02-2007, 04:48 AM

Well my cousin has now graduated from college and is now devoting his time to working with me on a POS 89 F150 and a 1956 Duracraft Sportsman boat. He is going to buy a MIG welder to keep the bondo to a mininmum so Ive decided to experiment on my ti. I kinda like the look of a boser hood and since all the metal on the front of my car is going to be replaced Im going to fabricate my own boser look on the ti. Im going to try to do this without actually welding any metal to the hood. Ive decided to weld the extentions to the metal around the grills and then bolt the tops of the extentions to the metal above the headlight brackets. If I go ahead and do this Ill post pics, but dose anyone here see any holes in my plan already?

01-02-2007, 04:48 AM	#1
SDKmann Senior Member Join Date: Oct 2005 Location: Quad Cities, Iowa Posts: 2,110 iTrader: (0) Photo Gallery	Boser "Hood" on the ti Well my cousin has now graduated from college and is now devoting his time to working with me on a POS 89 F150 and a 1956 Duracraft Sportsman boat. He is going to buy a MIG welder to keep the bondo to a mininmum so Ive decided to experiment on my ti. I kinda like the look of a boser hood and since all the metal on the front of my car is going to be replaced Im going to fabricate my own boser look on the ti. Im going to try to do this without actually welding any metal to the hood. Ive decided to weld the extentions to the metal around the grills and then bolt the tops of the extentions to the metal above the headlight brackets. If I go ahead and do this Ill post pics, but dose anyone here see any holes in my plan already? __________________ "Drive Fast and Take Chances"