My 318ti project So, this is my 318ti project atm... please leave some tip, reply or any sugestions =) Back for more progress! Got a new jobb to pay for the upcoming modds! Next to do: Install new rear breaks, Install the DTM lip, remove all rust on the car (found a bit to much), Pictures is a bit blury, cause im takeing them with my phonecam... My english aint to good, hope you understand =) * = Done while beeing member of this site Things iv done: -Changed front grill to black style late E36 / E46 lookalike -Changed front bumper to Rieger Infinity II -Changed Headligt to Hella Crome Projector headligths -Installed Xenon 8000k to the low beam light (dunno what its called in english) -Changed old floor mats to E46 floor mats -Fixed rear light to do double brake lights -Changed OEM whipers to Silence nometal whipers... *-Changed high beams to Xenon 8000k *-Buy new rear side windows and tint em, also mounted em *-Finished the rear end of my car... *-Bumpers painted at Paint workshop *-Add grills and clear foglighs with bluevision bulbs to my front bumper *-Add grills to my rear bumper *-Add plasma light into the instrument gauge / speedo / RPM *-Apply my rear bumper to the car *-Painted My dash trim *-Change muffler to dual 3,5" square muffler (not finished yet, have to reconstruct the rear part of my exhoust) pictures to come... *-Added grill behind the main grill *-Added a bit tint to the front window (pictures to come) *-Installed new MOMO steering wheel hub and "sports/raceing" steering wheel with blue stitches to match the interior color. *-Installed m3 mirrors (Theyr not painted jet...) *-Installed new Gear knob *-Installed new fogligths (pictures comin) *-Changed the cam shaft position sensor (old one didnt work) *-Installed Audio / power wireing for amp and speakers... *-Installed a 6-channel amp 4x75Watt RMS + 1x600Watt RMS *-Installed a 12" multimagnet subwoofer, 800Watt RMS 1600Watt MAX... *-Installed a Sony Xplod CDX-GT60U cd-player... *-Buy 18" rims (black gloss with 2/2,5" Polished Lip) **THESE HAS BEEN INSTALLED NOW* *-Installing 40\30 lowering springs, or install fully coilover kit.. (Il have to install bilstein or koni shocks as the car aint stiff enough) *-Installed Rear Enforced shock Guide supports *-Installed Rear Rubber Mountings *-Installed Rear Stabilizer links *-Bent the inside of the rear fenders as my 8,5" wide rims will fit *-Installed New rear bumper *-Rewelded the exaust to fit 100% with the new bumper Things im gonna do: -Buy paint and mount m-tech moldings around the car -Buy black a-b-c pillars -Buy black interior roof. -Buys new locks and handles both sides. -Mount the Centerforce dual-friction clutch that I just got from Summit Racing =) -New 4% header tint in front windshield -Buy and install rear windshield spoiler! -Change front indicator ligts to clear ones... or simply buy new haedlights w/ indicators thats black inside with projector and halos... -Change rear light to clear ones with indicator light, then get em tinted at Paint Workshop. -Remove the cat... (maby change it with a full flow silencer to silence the exhoust sound a bit, think it got a bit to loud with the muffler) -Repaint the whole car in a same color, maby a bit lighter... (also remove rust and such)... -Tint front side windows 43% -Tint rear window 23% -Mount the Rieger Infinity II DTM lip for the frontbumper -Buy and install Carbon Fibre emblems for hood, hatch... -Install Carbon Fibre Hood -Change the pedals -Buy and install aftermarket Sport seats -Buy and install new front speakers and rear speakers -New LSD! (from z3 m coupe? or any good E30 LSD) turbo kit (shopping list): *Since this is my daily driver im going to start buying parts, and install em when I have everything I need. Garret GT3071R Turbo: OBX turbomanifoil w/ downpipe 550cc injectors GS preformance Wg Oil drain kit Oilpipeing kit HKS BOV w/ pipe Vi-Pec Engine Management Intercooler kit Magnecor ignition cables and NGK iridium sparkpluggs Forged Arrow Rods w/ arp studs Turbocamshafts (not found any good yet) Forged CP pistons with 1:8,5 compression Rod crank brearings Rod piston bearings Valve train kit Cylinderhead gasket top MLS cylinderhead bottom gasket w/ apr studs Valve seal rings Vac high preformance valve springs Gauges: Boost gauge (bar) Oilepressure gauge (bar) Oiletemp måler (C) AFR gauge I was thinking on running 20-25psi boost. Il go take som new pictures as soon as possible! **Will add pictures as soon as I'v done something new!** Would be great with some feedback =) Look at my GALLERY to see more pictures of the project. Last edited by Fagerheim; 03-14-2010 at 03:50 AM. |