318ti.org forum - View Single Post

ClubSport · 04-28-2005, 04:21 AM

I used the stuff to clean my injector tips during the DASC install. The injectors were filthy, all coated with black gummy crap on the ends. I soaked the tips in a cup of that Seafoam for a minute and then scrubbed them out with q-tips. It does dissolve the stuff well. I didn't run it through the motor though.

04-28-2005, 04:21 AM	#6
ClubSport Senior Member Join Date: Jan 2004 Location: Fort Collins, CO Posts: 290 iTrader: (0) Photo Gallery	I used the stuff to clean my injector tips during the DASC install. The injectors were filthy, all coated with black gummy crap on the ends. I soaked the tips in a cup of that Seafoam for a minute and then scrubbed them out with q-tips. It does dissolve the stuff well. I didn't run it through the motor though.