I'm gonna try using the M3 ABS pump, master cylinder/reservior and ABS/ASC controller. The problem with mixing and matching the two setups is that the M3 master cylinder has 4 lines going to it while the 318ti master cylinder only has 2. And since I don't think the 318ti ABS/ASC controller will recognize the M3's pump, I'm gonna go ahead and swap that out as well. I did do a cross referrence and the M3's pump only comes on M3's while the 318ti's pump comes back to basically all e36's. They did offer different pumps for different years though, so you'ld have to make sure it's compatible with your model year. In my case, I'm not even certain that the M3 setup will work without displaying a fault code or ABS light. I'm keeping my fingers crossed that since I'm using all components off of the same car that it should work. |