318ti.org forum - View Single Post

adamj · 08-19-2009, 01:48 PM

I have a pretty much complete but disassembled m44 for sale. It is out of an 98 z3 and had 118k on it.

I will ship pretty much anything except for the block.

The engine overheated and blew the head gasket. I would recommend having the head ground by a machine shop before using.

The oil pan has a small crack in it.

I am located in Connecticut. PM me for your needs.

Just to clarify: the complete lower end has not been disassembled. The head has been removed from the block along with timing components, manifolds, etc.

08-19-2009, 01:48 PM	#1
adamj Junior Member Join Date: Nov 2008 Location: CT Posts: 19 iTrader: (0) Photo Gallery	1998 m44 1.9 partout I have a pretty much complete but disassembled m44 for sale. It is out of an 98 z3 and had 118k on it. I will ship pretty much anything except for the block. The engine overheated and blew the head gasket. I would recommend having the head ground by a machine shop before using. The oil pan has a small crack in it. I am located in Connecticut. PM me for your needs. Just to clarify: the complete lower end has not been disassembled. The head has been removed from the block along with timing components, manifolds, etc. Last edited by adamj; 08-26-2009 at 01:05 PM.