Quote:
Originally Posted by PhotoMotion Chris, I originally thought the 328 shaft would fit, but according to my measurements I need a shaft that is 1476mm long. According to realoem, the 328 shaft is 1492mm. 16mm may be bridged by the compression shaft I suppose, but I wonder if it wouldn't be too long. |
Just for comparison sake, according to RealOEM the dirve shaft that I am using is
01 DRIVE SHAFT ASSY FIVE SPEED GEARBOX L=1512MM 26111227445
16mm is around 5/8 of an inch (you are not really talking all that much of a difference in length). There is room for adjustment at the splined section just forward of the carrier bearing. Mine went in just fine (with a little adjustment). The drive shaft that I'm using is 1512 MM and there was room for that adjustment with my set-up.