318ti.org forum - View Single Post - Passenger Window Quit

onewhippedpuppy · 01-12-2011, 04:46 AM

Cross-post from the electrical forum, as there were no suggestions. My passenger side window has suddenly stopped working, and I'm out of ideas. Driver's side works normally, fuse is good (obviously), I tried swapping switches and the switch is good. Not only does the window not work, but the switch doesn't light up either. I get 5V in the correct location per the schematic, the ground terminal shows a good ground, and when I switch on the lights I get 5V there as well. I'm leaning towards an issue with the connector or body control module, as everything else seems to check out. Any suggestions?

01-12-2011, 04:46 AM	#1
onewhippedpuppy Member Join Date: Sep 2010 Location: Wichita, KS Posts: 52 iTrader: (1) Photo Gallery	Passenger Window Quit - I'm Out of Ideas Cross-post from the electrical forum, as there were no suggestions. My passenger side window has suddenly stopped working, and I'm out of ideas. Driver's side works normally, fuse is good (obviously), I tried swapping switches and the switch is good. Not only does the window not work, but the switch doesn't light up either. I get 5V in the correct location per the schematic, the ground terminal shows a good ground, and when I switch on the lights I get 5V there as well. I'm leaning towards an issue with the connector or body control module, as everything else seems to check out. Any suggestions?