318ti.org forum - View Single Post

denglish318ti · 05-10-2012, 12:55 PM

Hi, I want to upgrade from the RRFPR to bigger injectors and mapping. What injectors should I be using? I know I want a flow rate of around 30lb (315cc/min), with high impedance injectors. I guess EV1 type would be easier to fit, and with jetronic connectors. I see the standard injector is a type E spray pattern, which is to the side, would a standard cone spray be ok? What have people tried out?

I see the standard length is 79mm long, with the adapters in place would 77mm be about right? Can the fuel rail be spaced upwards, but not down?

Cheers
Dylan

05-10-2012, 12:55 PM	#1
denglish318ti Senior Member Join Date: Jan 2008 Location: Leeds, England Posts: 133 iTrader: (0) Photo Gallery	Which injectors for DASC mapping Hi, I want to upgrade from the RRFPR to bigger injectors and mapping. What injectors should I be using? I know I want a flow rate of around 30lb (315cc/min), with high impedance injectors. I guess EV1 type would be easier to fit, and with jetronic connectors. I see the standard injector is a type E spray pattern, which is to the side, would a standard cone spray be ok? What have people tried out? I see the standard length is 79mm long, with the adapters in place would 77mm be about right? Can the fuel rail be spaced upwards, but not down? Cheers Dylan __________________ Supercharged 318Ti