View Single Post
Old 06-03-2012, 11:10 PM   #7
ryszardsh
Member
 
Join Date: Oct 2009
Location: Louisiana
Posts: 56
iTrader: (0)
Default

Works for sure, that was the cure to my blown speakers. Just make sure you put them on the correct side of the car - the 2 parts you get are mirror imaged, necessary given the screw stud patters, and the parts "can" be installed upside down on the wrong side. if you do that there will be an air gap between the adapter plate and the car, does not sound as good as getting them on the correct side...

RAS
ryszardsh is offline   Reply With Quote