318ti.org forum - View Single Post

pdxmotorhead · 12-28-2012, 06:11 AM

Even with the tool I'd use a dial indicator to check the timing against the crank if the head has been machined.

Dave

12-28-2012, 06:11 AM	#3
pdxmotorhead Senior Member Join Date: Mar 2005 Location: Portland Or Posts: 2,666 iTrader: (1) Photo Gallery	Even with the tool I'd use a dial indicator to check the timing against the crank if the head has been machined. Dave __________________ Dave - PDX 1995 318ti - Active Black and Tan. 2005 330xi - Mtech 1 - 6spd - Orient Blue/Black