If I read the ETM and the above training PDF correctly, you guys are wiring the actuators in parallel with the rear hatch lock actuator – precisely because that is the only combination that both locks and unlocks the door. But does it double lock it? If you roll down the window of the door with the new actuator, lock the car from the other door, return to the original door and pull the inside door handle, does that unlock the door and the car? _____________________ Sorry about the extended EDITS: I am trying to flush out a possibly non-obvious issue from a great distance. Last edited by John Firestone; 07-16-2013 at 12:52 PM. |