View Single Post
Old 07-17-2013, 09:16 PM   #35
620 Garage
Junior Member
 
Join Date: Jul 2012
Location: Maple Glen, PA
Posts: 15
iTrader: (0)
Default

Greetings:

What suspension are you running? Also, what spring rates? Im in the process of turning my Ti into a Track car I can drive to/from the track. Just want to compare notes on what works for other track worthy Ti's. My current set up is Front 3 way JRZ struts and rear 2 way Moton Shocks. Front GC camber plates and rear solid shock mounts. I run about 250lb on the canisters and the valving is fairly aggressive on both. My spring rates are 800F and 970R. Im keeping stock bars so i went up on the springs. The car sits at 2530lb and will drop to about 2400. I set the alignment at 1/16 toe out L/R front for a total of 1/8". 2.5 neg camber front. Rear is set at 0 toe and 1.8 neg camber. Granted, I have not rested this set up yet so this is basically my baseline. Need to get new motor/trans mounts and recondition the shifter before I do.
PS: running Toyo 888 235/40 all around on 17x8 and 17x9 IFG's

Cheers,
Ricky
620 Garage is offline   Reply With Quote