Great write up. I recently got a 97 318i MT with cam shaft position sensor error (among many other issues). Since I had to take the intake manifold off to replace the sensor, armed with this write up, I went for replacing all the hoses and vacuum lines, cleaned the intake manifolds, throttle body, PCV, ICV, and had the fuel injectors professionally cleaned/refurbished. Now I am putting it all back together and scratching my head trying to figure out where the knock sensor connector holder bracket should bolt on. who ever worked on this car before had left the bracket hanging loose. Any help or pic of where the knock sensor connector holder bracket mounts would be great. Thanks in advance. |