here's an update since I tested a few things on the way home from work this morning. Is DISA strictly RPM based, or does it take load/throttle position into account? in 2nd and 3rd gear if I only use part throttle then I'm able to pull past 5000 rpm. but if I go over half throttle it bogs and I get loud induction noise. based on this I'm almost thinking fuel is the problem I'm going to check the fuel pressure regulator and pressure at the rail later when I wake up. lluckily I have another 95ti that I can borrow some parts from to try and figure this out. looking forward to some ideas and input though. Thanks |