So today finaly got my lsd back from getting the bearings pulled, tore it down and cleaned it, I recommend this if you haven't ever done so. It was littered with gritty shavings and what not. all plates were good, so re assembled and assembled rear, yat
Rear is finaly in today, again.... yay
And for what I was told by Stromung, is the last US exhaust for the TI
yes, I wet myself too when I first saw it.
Brake lines, Brakes, exhaust, all connections, driveshaft, heat shields, ect. will bleed brakes tomorrow, install door panels, drop her, and shake down.
