Answer to the questions: 1. I used Powerflex urethane diff bushing 2. Clunking when taking off from dead stop could mean a lot of things - Loose CV axles - Loose propeller shaft splines and u-joints - Deteriorated guibo - Dual mass flywheel loose or separated - Deteriorated Diff bushing - Play in transmission input and output shafts - loose center bearing If you are getting rid of the car, just be honest to the buyer and just pass them on to the next owner. __________________ 1996 Ti 280k miles and still going.... 1993 964 - holding on to this one 2001 Burban, 240k miles 2018 Suburban Z71 |