318ti.org forum - View Single Post

changus · 11-02-2005, 04:55 PM

I too replaced my rear speakers with Infinity. I used a 5.25 and again made a mounting plate from 5/8" MDF. I used the plastic scoop that came out as a template and cut the MDF opening with a dremel cutout tool and the shaped it to fit with the dremel sanding disk. Fits like a glove but sounds so-so. I did find out later the Boston Acoustic also make a 4" that will fit. About $99 bucks.

11-02-2005, 04:55 PM	#33
changus Member Join Date: May 2005 Location: Virginia Posts: 48 iTrader: (0) Photo Gallery	I too replaced my rear speakers with Infinity. I used a 5.25 and again made a mounting plate from 5/8" MDF. I used the plastic scoop that came out as a template and cut the MDF opening with a dremel cutout tool and the shaped it to fit with the dremel sanding disk. Fits like a glove but sounds so-so. I did find out later the Boston Acoustic also make a 4" that will fit. About $99 bucks.