Quote:
| Originally Posted by chaison I have a 96 ti, and i was wanting to fit a K&N cold air intake, my car doesn't have a place to put an air filter adapter. It just has a air flow meter. Can i install a cold ait intake? Please help... |
You can find kits out there that have adapters for the will attached the AFM on your car. Although, if you have 96 TI the motor should be an M44, and you should have a MAF sensor in place of the AFM.
I know that Dinan makes a pricey M44 CAI, but pretty much what you will need for the MAF set up is 3" hose that you will be able to connect a pices of pipe with a filter on it, and run the tube into the brake duct area.
-Chad