john I will follow your lead its not worth doing if its not a noticeable improvement and results in still feeling loose.. but now I really have my work cut out for me.. 1) replace tranny + mounts 2) replace clutch 3) replace flex disc 4) replace bush on clutch arm 5) overhall shifter with MZ3 one - you have to bend the shifter rod right? 1 + 2 really was not on my agenda....the car is more then driveable and Ive been told apart for the 1 control arm bush it will pass a mot fine. But I feel like I fighting all these different areas at once ... clutch slipping symptoms, syncro/throw out bearing, sloppy selector. Last edited by d235353; 10-31-2010 at 03:39 PM. |