Quote:
Originally Posted by lui  Hi guys
I'm new to this forum. I read your replies n I'm still stuck. Here's my problem
The car over heated and the fan didn't turn on, on high/low speed, so i unplugged the temperature sensor plug(left top of radiator) and jumped it to make high speed work(engine idling and on the "on"position).
The low speed doesn't work when you jump it with the car on the"on" position or idling. Low speed works when the aircon is on with the car idling.
Any ideas on what to do next??? |
Get yourself
BMW e36 Bently Manual There is trubleshooting procedure.
With AC high speed should work, double check please.
If low speed doesn't work there might be a few problems.
1. And most common - low speed resistor is gone. Easy and cheap fix:
http://www.318ti.org/forum/showthread.php?t=40133 2. Thermoswitch migh be gone. Easy and not expensive to replace.
3. Check low and HIGH speed fuses and relays. It was reported that when high speed relay is gone, low speed wont work. I doubt that this is your case since you have high speed by jumpering the plug.