To Enter the code number
When you switch on the unit after connecting it to the vehicle power supply, the following message appears in the display panel.
CODE -----
Use the station keys (1-6) to enter the five-digits code in the correct sequence.
For example: if the first digit in the code is 4, then you start by pressing the key station for 4.
The unit is ready for operation as soon as you finish entering the fifth digit in the code. It automatically switches to the radio mode or if a cassette is inserted in the slot, to the cassette mode.
NOTE:
If wrong code is entered twice in succession, the unit responds by flashing CODE in the display. That indicates that only one more attempt will be allowed.
After three incorrect entries, WAIT appears in the display.
One hour must now elapse before any further attempts to enter the code can be made. The unit should not be switched off during this period.
Disconnecting the unit from the power supply during this period will start the delay period.
Reference: Owner's Manual |