I'm voting for "thermostat going bad." The temp. gauge should really go to 1/2 and stay there. 1/4 is not better than 1/2. Keep in mind that you'll need to thoroughly bleed the air out of the system before you will get an accurate reading on the temp. gauge. There are a couple of write-ups here on this site that will tell you how to bleed the system..
If the replacement thermostat doesn't cause the gauge go to 1/2 and stay there, replace it too. __________________ Real men know how to SEARCH!
THIS IS A MILLPOINT BLUE INTERIOR
Mods 'n' stuff: Star Spoke 43 wheels - X-Brace - Mason Engineering front strut brace - CF gauge overlay - ZHP shifter knob - Racing Dynamics cat-back - Doubled brake lights - M-tech rear spoiler
From Page 68 of the 1997 Owners Manual: "Vehicles equipped with ASC+T remain subject to the laws of physics." |