View Single Post
Old 01-21-2020, 04:48 PM   #9
Venoak
Junior Member
 
Join Date: Mar 2018
Location: SoCal
Posts: 8
Vehicles
iTrader: (0)
Default

You might want to search at m42club.com for COP conversion information too. They have identified connectors to make your own harness. Parts cost about $75 + coils. If you do this make sure you test that the coils fit through your valve cover openings (24mm dia.). There is an interesting solution using the Delphi e90 coils that I test fit. However after discussing this with my friend and master bmw mechanic I decided that putting coils in the middle of a hot engine block would not last as long as the almost bullet proof original coil pack. But my motivations are probably different than yours.
Venoak is offline   Reply With Quote