I looked into that, and my car was before they had the clutch-to-start switch (mine's 3/96), so I'm not even going to include that. But if you want it, it think you just need to connect the two pedal switch wires, to two wires in the park-neutral safety / range switch. You need to find the two wires that connect which allow the automatic car to only start in Park or Neutral. OK, I just pulled put my Bentley manual and found old notes I have. Looks like you just need to solder together: Green/Grey (#5) to Brown/Black (#7) to bypass the park/neutral safety switch. Or install the clutch switch wires inline with these two wires, so you complete the circuit to let it start. Also, for the reverse lights, I'm pretty sure you need to connect the switch on the manual transmission inline with these wires on the park-neutral safety / range switch : Green/White (#2) to Blue/Yellow (#3) |