I got a little bit done yesterday.
I started by taping off the block. I ended up running out of tape so I could only one side=/
I then laid down some primer:
I then had to wait for that to dry, so I started working on the bay again. I busted out a propane torch, wire brush, and pallet knife.
Passenger side:
Driver side:
I ended up having to quit that for the day because my brush bit the dust:
By this time the primer was dry, so I laid down the paint:
It was supposed to have more of a champagne tint to it, but it definitely looks good=) It looks like liquid mercury. Hopefully Saturday I will get the other side painted, as well as removing the crank bolt to pull the timing cover.
I also snapped a few crappy pictures of my rearend parts finished up:
And a shot of the pistons clean:
More to come Saturday=)