Quote:
Originally Posted by adam28  Hi mate
The actual light doesnt illuminate regardless of switch position. Ive ordered a new switch to test.
Is their a way i can bridge any of the wires in the plug which attaches to the switch? So like bypass switch. This would prove the switch was faulty if the light then came on.
Cheers |
You can try jumpering pin 5 to 6. The plug positions should be numbered. Just don't touch a wire to the chassis or you may blow a fuse. You may like to use a bright light and a magnifier to read the numbers.
The ASC switch has a domed, gold-plated plate that contacts a selectively gold-plated circuit board. I would expect that would be fairly reliable. The switch is not sealed, however, so if somehow liquid got in there, it might fail.