[EtherD5]

The harness is soon to be in the mail, thanks again GotSWoo.

In an effort to maintain original equipmentish reliability and so forth, I was wondering if one could pull the lock cylinders from these cars, swap ‘em, and import the key from the 528 to the ti because of the ews and whatnot. I guess I’ll go find out if they are the same...��

Update: I’ve since discovered that the 528i I have is ews3 and the 318ti is ews2, and there are chassis wiring differences so I can’t just add the ews3 module and lock cylinder to the ti. I’ll have to have the DME from the m52 “aligned” to the ews2 and key from the ti. Apparently not super expensive at the dealer. Supposedly 1 hour billed and takes ten minutes.