[Nix328ti]

I've found the timing for the M54B30 cams:

M54b30 // int: 240º(9.7mm) // open:-6º close:66º // exh: 244º(9.0mm) // open:47º close:17º

That works out to these specs:

Intake Duration is 240.00 degrees.
Exhaust Duration is 244.00 degrees.
Installed Intake Centerline is 126.00 degrees ATDC.
Installed Exhaust Centerline is 105.00 degrees BTDC.
LSA is 115.5 degrees
Overlap is 11.00 degrees

I may look into advancing the intake cam somehow to improve performance a bit, and compensate for the lack of a VANOS on the exhaust cam.