Need the puller/installer tool, or make your own. It is pricey but the best way to prevent ruining your new bearings when you install them. If you buy one on ebay and use it for this job you can resell it and make almost (if not all) your money back because you can be sure someone else needs this tool too. __________________ Alpine Weiß 1995 318ti M50tu mostly stock, chip'd 413, AFE Intake. e36 M3 front brakes, e30 M3 rear calipers. e28 3.25 LSD + e30 axles. Custom stainless Magnaflow 2 in 1 out muffler. R.I.P schwartz 1990 325is |