top of my pistons after a bunch of pulls these pic's are from 2hours later the oil is dry and cooked from the heat i's fresh when i first pulled the plugs it's not speard around the pistons it's more of a line run down the piston witch makes me think the the valve steams are leaking maybe the motor not broke in fully i have exaclly 1,162 miles on it car sat for a year during turbo swap maybe i shouldnt boost over 12 pounds for an other 500 miles and see if that helps or maybe im just tripping oh and no all my cylinders read 85 psi and (4 )is at 100 psi wonder if it was a bad build or just not fully broke in any fed back please thank's
looks like normal carbon build up on pic's but you can see a thick oil drop b 4 it drys up .