took it to work today, I swapped the rims with mine, replaced the front brakes, zip-tied the bumper, painted my took hook and drilled a hole for it, took out the back seat and put my Sparco strut tower bar on
changing the brakes was a b*tch, both set screws needed to be drilled out. when I did the first one I ended up making all the drill bits too dull to do the second one so I had to cut it out with an oxy-acetylene torch
problems that need to be fixed:
both rear springs are broken
right front sway bar bracket is broken (the part that's welded to the frame)
rear brakes need to be done
I've got an oil leak somewhere, probably the filter housing gasket
battery tie down bolt broke
the next autocross is next weekend, I don't think I'll be ready in time for it
on to pics, got tired of the HARD PARKIN plate so I swapped it with something a bit more fitting
